The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.
Power Source: 220 -240V/AC
Detection Range: 160°
Power Frequency: 50Hz
Ambient Light: 3-2000LUX (adjustable)
Working Humidity :< 93%RH
Time-Delay : min:10sec±3sec
Installation Height: 1m-1.8m
Power Consumption:0.45W (work)
Rated Load: 500W (incandescent lamp) 0.1W (static)
100W (energy-saving lamp)
Detection Motion Speed: 0.6-1.5m/s
Detection Distance: 9m max (<24℃)
➢ Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when LUX is adjusted on the maximum position. It can work in the ambient light less than 3LUX when it is adjusted on the minimum position. As for the adjustment pattern, please refer to the testing pattern.
➢ Time-delay is added continually: When it receives the second induction signals after the
first induction, it will compute time once more on the rest of the first time-delay basic.(set time)
➢ Time-delay adjustment: It can be set according to the consumer’s desire. The minimum
time is 10sec±3sec. The maximum is 7min±2min.
➢ The switch: “ON”、“OFF”、“PIR”.
INSTALLATION: (see the diagram)
➢ Shut off the power.
➢ Loosen the connection column on the bottom of sensor, plug the wire into connection hole, tighten the screws; unload the surface of sensor, connect the sensor into connection box.
➢ If you want to install it in quadrate connection box, penetrate the setscrew into installation hole, aim at the installation hole on connection box, then tighten the screw; if you want to install it in circular one, you can use the same way as the quadrate, also adjust the sensor’s position, tighten the setscrew on surface, then the fixing arm
will open automatically, fasten the connection box.
➢ Switch on the power then test it.