- The timer has a total of 16 ON/OFF programs.
- Manual on/auto/manual off can make settings as required very easily.
- 15 Combinations of day or blocks of days are available for the timer
Plug the timer into a regular 220-240 Volt housrhold power point and turn the power on.
Leave for approximately 12 hours to charge the memory back up batteries.
After charging clear all current information by pressing the (R) button with a sharp object such as a pen or pencil.
The timer is now ready to be set up for use.
Setting Current Time
Press the CLOCK button and hold, simultaneously press the week button until the actual day is displayed.Continue by pressing HOUR or MINUTE button until the current hour or minute is displayed. When setting, the buttons week, hour or minute can be held down for rapid forward counting.
Release both buttons. The week and time will be set to reset incorrect time, repeat previous steps
|Voltage||220V-240V AC 50Hz|
|Max Load||1000 W|
|Min setting Time||1 Minute|
|Operating temperature||-10 to +40℃|
|Accuracy||+/-1 minute per month|
|Battery backup||Ni-Mh 1.2V 80mAH|