EL-S12

Function

◆ Photoelectric detect

◆ Ceiling mounted

◆ Light labyrinth sensor

◆low power consumption CMOS processing

◆ Special anti-humidity

◆ Manual test, handy-reset

◆ Independence/network/ wireless(optional)

◆ High  working stability

◆ Unilateral PCB technology

◆ Thin structure design

◆ Special design ,anti-light, dustproof ,mothproof

◆ Strong adaptability to circumstance

◆ SMT adopted

◆ Dustproof, mothproof and anti-white light

 

Specifications

Power voltage: 9V battery

Working current :static ≤10 uA ,working 20-25 uA

Smoke sensibility: in coincide with UL 217 NO. standard

Gas interface temperature: 10%-90%

Buzzer Sound :85Db (ten feet )

Battery life : Minimum one year

Installation

- choose a suitable installation area

- drill two holes on the ceiling or wall as the bracket site

-drill according the bracket pore range

-put two plastic loin pin, then stick the bracket on the wall

-plug and fix it still the bracket in firm .

-don’t open the detector, it is a hermetic set, only fill the battery in to the backspace

-put the detector back against the bracket site, and revolve in sequential time, make sure the screw into the loin pin.

-press the test button to test the detector is

normal or not

-after install, it will in working state, the LED will flash one time a minute , when some burning motes are detected, it will give out ringing and loud whistle until the air density in balance